| 1 |
Dr. Fixit Pidiproof LW+ |
It is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation. |
|
| 2 |
Dr. Fixit Torchshield AP 3160/4160 |
This range of polymer modified membranes are modified bitumen waterproofing membranes manufactured by saturating and coating a polyester carrier with a waterproofing compound made of a special grade of modified bitumen with APP polymers. |
|
| 3 |
Dr. Fixit Polyplus CP |
It is composed of cement, graded aggregates and proprietary reactive agents and additives. It is used as a surface applied, permanently active waterproofing treatment for concrete. The active ingredients when activated by contact with penetrating water, form crystals which penetrate deep within the concrete matrix blocking pores, voids and cracks, effectively sealing against water ingress. |
|
| 4 |
Dr. Fixit Bitufix |
It is an emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission. |
|
| 5 |
Dr. Fixit Pidiseal PS 41G |
It is a two part elastomeric sealant which when mixed and applied cures by chemical reaction to form a tough, flexible rubber seal. It is recommended for sealing construction and expansion joints. |
|
| 6 |
Dr. Fixit Pidicrete URP |
It is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. |
|
| 7 |
Dr. Fixit Bathseal WPC |
It is a two-component cementitious, polymer modified, elastomeric waterproofing coating composed of cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates, typically in wet areas such as bathrooms, kitchen sinks, etc. |
|
| 8 |
Dr. Fixit Coal Tar Epoxy |
It is two-part coal tar epoxy based coating, composed of best quality dehydrated coal tar, liquid epoxy resins and curing agent, properly selected & graded inert fillers, additives and solvent. It is used as an anticorrosive & protective coating for concrete as well as steel structure because it has excellent chemical resistance properties in atmosphere or in contact with chemical solutions such as effluents, sewage, salty water and organic / inorganic acids & alkalis. |
|
| 9 |
Dr. Fixit Concrete Guard |
It is a solvent based composition of acrylic solution polymer, properly selected & graded inert fillers, light fast pigments & additives. It is specially formulated to protect reinforced concrete and other masonry cementitious substrate that is directly exposed to atmospheric conditions like UV radiation, high humidity, heavy rain, industrial pollution, & carbonation. |
|
| 10 |
Dr. Fixit Cool Roof Coating |
It is heat reflective waterproof coating engineered with UV cross-linkable polymer technology. Upon drying, exposure to natural light, UV reaction with polymers cures the coating to very elastic yet very tough and highly heat reflective membrane. Once completely cured, it exhibits excellent resistance to dirt pick-up and UV; an essential and critical need to retain whiteness thereby heat reflective properties of installed coating with ageing. |
|
| 11 |
Dr. Fixit Curing Compound |
This Compound is composed of synthetic emulsions, white pigments, fine fillers & additives. On drying it forms a temporary membrane, which allows the concrete to retain sufficient water for optimum curing of 28 days. After 28 days, curing compound dissipates itself from the concrete surface hence no problem for bonding of plasters. |
|
| 12 |
Dr. Fixit Dampguard |
It is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. |
|
| 13 |
Dr. Fixit Epoxy Zinc Primer |
It is a two-component system based on metallic Zinc and epoxy resin, hardener & additives which on mixing gives a grey coloured liquid. Dr. Fixit Epoxy Zinc Primer is recommended for coating on steel reinforcement or steel surfaces as an anti corrosion primer. |
|
| 14 |
Dr. Fixit Epoxy Bonding Agent |
It is a two part solvent free bonding agent composed of liquid epoxy resin and hardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steel components because it gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks, tiles, etc. |
|
| 15 |
Dr. Fixit HydroShield PUD Plus |
It is a hybrid PU elastomeric waterproofing roof coating, new technology based on water borne Polyurethane dispersions, offering excellent protection from moisture and standing water. Exhibits high resistance to all weather conditions and excellent resistance to UV radiation. |
|
| 16 |
Dr. Fixit Micro Concrete |
It is a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. It is composed of good quality cement, properly selected aggregates & additives. |
|
| 17 |
Dr. Fixit Newcoat Cool |
It is a heat reducing & ‘Energy Saving’ acrylic waterproofing coating providing a seamless waterproof barrier that can withstand expansion and contraction movements due to heat build-up on the roof surfaces. It helps in reduction of enery usages by less heat tranfer into buildings thus keeps the interiors cool. The coating serves the dual purpose of thermal reduction & with additional waterproofing protection. |
|
| 18 |
Dr. Fixit Newcoat |
It is a heavy duty terrace waterproof coating system, composed of specially developed highly elastic & resilient acrylic polymers, properly selected & graded fillers, lightfast & weather durable pigments, micro-fibres, additives & best quality fungicidal in water medium. It is used as a liquid applied waterproofing membrane for all types of building terraces. |
|
| 19 |
Dr. Fixit Pidicrete MPB |
It is composed of acrylic co-polymer emulsions & additives. It is used as bonding agent for new to old substrates & cement mortar modifier because it provides strong bonds to old & new concrete. Improves tensile & flexural strength of concrete and increases the durability of the structure. When mixed with cement, It forms a matrix & provide excellent waterproof coating. |
|
| 20 |
Dr. Fixit Polymer Mortar HB |
It is a ready-to-us repair mortar, composed of Cement, properly selected & graded fillers, polymers, additives with specially designed acrylic fibers. It is available in powder to be mixed in a definite quantity of water for application. It is used for repairs of structural members of residential, commercial & industrial buildings. |
|
| 21 |
Dr. Fixit Powercrete |
An acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonry surfaces. |
|
| 22 |
Dr. Fixit Prebond |
It is a preformed HDPE fully bonded membrane that bonds to the wet concrete cast on the membrane. After the membrane bonds with the concrete it forms an integral seal which prevents lateral water migration and makes it unaffected by any substrate settlement below the slabs. |
|
| 23 |
Dr. Fixit Primeseal |
It is water-based primer composed of acrylic emulsion polymer, properly selected fine fillers, white pigments & additives in water as a medium. It is used as primer over exterior & interior building walls before application of Dr. Fixit Raincoat & other water based paints. |
|
| 24 |
Dr. Fixit PU Foam Injection |
It is based on MDI (Methylene Diphenyl iso cyanate) polyurethane pre-polymer & accelerator. The system only reacts when it comes in contact with water, producing a relatively stiff & inert polyurathane foam. It is a 100% solid & solvent free polyurethane grout for quick temperrory closing & sealing of water bearing cracks, cavities and leaks under hydrostatic pressure. |
|
| 25 |
Dr. Fixit PU Plain Injection |
It is based on hydroxyl terminated hydrophobic polyol & iso cyanate terminated hardener. It is used for sealing & filling of dry, damp or water bearing cracks. It serves as horizontal water stop against capillary rising moisture in brickwork, stone work, etc. It has low viscosity, high penetration, quick setting and forms tough & flexible polyurethane rubber after complete chemical reaction. |
|
| 26 |
Dr. Fixit Pidiseal PS 41G |
It 41G is a two part elastomeric sealant which when mixed and applied cures by chemical reaction to form a tough, flexible rubber seal. It is recommended for sealing construction and expansion joints. |
|
| 27 |
Dr. Fixit Raincoat Coool |
It is a heat reducing & ‘Energy Saving’ acrylic waterproofing coating . It is composed of specially selected reflective additives, light fast & weather durable pigments & graded inert fillers. It is a solar reflective coating on exterior walls which helps in reduction of enery usages by less heat transfer into buildings & keeps the interiors cool. |
|
| 28 |
Dr. Fixit Repellin WR |
It is composed of Siloxane & Silane polymers dispersed in high boiling point solvent. It is used for waterproofing of concrete & cementitious vertical walls of building because it penetrate deeply into the substrate & provides an effective water repellent protective coating. |
|
| 29 |
Dr. Fixit Roofseal Flex |
It is a two component cementitious coating, composed of high quality cement, properly selected & graded fillers, additives and acrylic polymer. It is suitable for achieving waterproofing for roofs, because it provides strong bonding, good waterproofing and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete surfaces. |
|
| 30 |
Dr. Fixit Roofseal Top Coat |
It is a single component, insulating elastomeric waterproof coating for roofs that will offer a seal against water and heat, waterproofing and insulating in easy steps. This monolithic waterproof membrane provides superior crack bridging and long lasting tough weather protective seal for exposed (new and old) roof surfaces. |
|
| 31 |
Dr. Fixit Super Latex |
It is based on modified Styrene butadiene latex used for high performance applications in waterproofing and repairs. It is used for repairs of spalled concrete such as – floors, columns, beams, chhajjas, slabs & waterproofing of toilets & bathrooms & terraces. It bonds strongly to old & new concrete & plaster. |
|
| 32 |
Dr. Fixit Raincoat Waterproof Coating |
It is composed of high quality emulsion polymer, weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings. |
|
| 33 |
FEVISEAL WEATHERPROOF PRO |
It is a one-part, medium modulus, neutral curing silicone sealant for use in new or remedial weatherproofing applications. In addition to the unique features of silicone rubber such as superior high and low temperatures resistance, water resistance, and outstanding weatherability, Feviseal weatherproof Pro also provides excellent adhesion to glass, metal and numerous construction materials. |
|
| 34 |
Dr. Fixit Polyplus CP Admix |
It is an integral crystalline waterproofing admixture added to the concrete mix at the time of batching. It consists of Portland cement, very fine treated silica sand and various active chemicals. These active chemicals react with the moisture in fresh concrete with the by-products of cement hydration to cause a catalytic reaction, which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. |
|
| 35 |
Dr. Fixit Raincoat Classic |
It is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms high film thickness. |
|
| 36 |
Dr. Fixit Raincoat Select |
It is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protectivem coating for exterior walls of the buildings because it forms higher film thickness. |
|
| 37 |
Dr. Fixit Samshield XL 1500/2100 |
It is a SBS self adhesive waterproofing membrane based on a tropical grade of polymer modified bitumen. The bitumen compound is laminated onto an impervious, non-perforated, HDPE Valeron® film. The membrane is protected on the self adhesive side with a silicone coated release film. |
|
| 38 |
Dr. Fixit Epoxy Injection Grout |
It is a solvent free crack injection material composed of very low viscous liquid epoxy resin & ahardener system. Dr. Fixit Epoxy Injection Grout is used to seal & inject cracks in concrete floors, walls & structures because it provides deep penetration, shrink free solid mass, strong bonding inside the cracks and excellent resistance to honey combing & chemicals. |
|
| 39 |
Dr. Fixit Fastflex |
It is a high elastic, waterproofing cement based material. With special waterproofing properties, easy to use by plastering, applying by using a brush and roller or trowel. Can be painted or overlaid. Use with waterproofing for non-toxic water tanks, can be used with drinking water. (Passed the water quality test on toxic substances (heavy metals) of the Water Quality Control Department) Provincial Waterworks Authority. |
|
| 40 |
Dr. Fixit Pidifin 2K |
It is 2 parts polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry part is mixed with acrylic-modified emulsion and applied according to direction, the cured. The application can be applied on damp surface and Excellent waterproofing property - No leakage up to 10 m. hydrostatic pressure. |
|
| 41 |
Dr. Fixit Pidigrout 10M |
It is a high strength non – shrink free flow grout for foundation. It is ready to use, free flowing, high strength (compressive strength can reach to 800 ksc at 28 days) and dynamic load stable cementitious grout. |
|
| 42 |
Dr. Fixit Torchshield Primer |
It Primer is a solvent based bitumen modified primer conforming to ASTM D/41, to be used to seal and prepare the substrate prior to the installation of the Dr. Fixit Torchshield torch-on and Dr. Fixit Samshield, self adhesive membranes. |
|
| 43 |
Dr. Fixit Pidiproof LW+ |
It is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation. |
|
| 44 |
Dr. Fixit Torchshield AP 3160/4160 |
This range of polymer modified membranes are modified bitumen waterproofing membranes manufactured by saturating and coating a polyester carrier with a waterproofing compound made of a special grade of modified bitumen with APP polymers. |
|
| 45 |
Dr. Fixit Polyplus CP |
It is composed of cement, graded aggregates and proprietary reactive agents and additives. It is used as a surface applied, permanently active waterproofing treatment for concrete. The active ingredients when activated by contact with penetrating water, form crystals which penetrate deep within the concrete matrix blocking pores, voids and cracks, effectively sealing against water ingress. |
|
| 46 |
Dr. Fixit Bitufix |
It is an emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission. |
|
| 47 |
Dr. Fixit Pidiseal PS 41G |
It is a two part elastomeric sealant which when mixed and applied cures by chemical reaction to form a tough, flexible rubber seal. It is recommended for sealing construction and expansion joints. |
|
| 48 |
Dr. Fixit Pidicrete URP |
It is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. |
|
| 49 |
Dr. Fixit Bathseal WPC |
It is a two-component cementitious, polymer modified, elastomeric waterproofing coating composed of cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates, typically in wet areas such as bathrooms, kitchen sinks, etc. |
|
| 50 |
Dr. Fixit Coal Tar Epoxy |
It is two-part coal tar epoxy based coating, composed of best quality dehydrated coal tar, liquid epoxy resins and curing agent, properly selected & graded inert fillers, additives and solvent. It is used as an anticorrosive & protective coating for concrete as well as steel structure because it has excellent chemical resistance properties in atmosphere or in contact with chemical solutions such as effluents, sewage, salty water and organic / inorganic acids & alkalis. |
|
| 51 |
Dr. Fixit Concrete Guard |
It is a solvent based composition of acrylic solution polymer, properly selected & graded inert fillers, light fast pigments & additives. It is specially formulated to protect reinforced concrete and other masonry cementitious substrate that is directly exposed to atmospheric conditions like UV radiation, high humidity, heavy rain, industrial pollution, & carbonation. |
|
| 52 |
Dr. Fixit Cool Roof Coating |
It is heat reflective waterproof coating engineered with UV cross-linkable polymer technology. Upon drying, exposure to natural light, UV reaction with polymers cures the coating to very elastic yet very tough and highly heat reflective membrane. Once completely cured, it exhibits excellent resistance to dirt pick-up and UV; an essential and critical need to retain whiteness thereby heat reflective properties of installed coating with ageing. |
|
| 53 |
Dr. Fixit Curing Compound |
This Compound is composed of synthetic emulsions, white pigments, fine fillers & additives. On drying it forms a temporary membrane, which allows the concrete to retain sufficient water for optimum curing of 28 days. After 28 days, curing compound dissipates itself from the concrete surface hence no problem for bonding of plasters. |
|
| 54 |
Dr. Fixit Dampguard |
It is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. |
|
| 55 |
Dr. Fixit Epoxy Zinc Primer |
It is a two-component system based on metallic Zinc and epoxy resin, hardener & additives which on mixing gives a grey coloured liquid. Dr. Fixit Epoxy Zinc Primer is recommended for coating on steel reinforcement or steel surfaces as an anti corrosion primer. |
|
| 56 |
Dr. Fixit Epoxy Bonding Agent |
It is a two part solvent free bonding agent composed of liquid epoxy resin and hardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steel components because it gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks, tiles, etc. |
|
| 57 |
Dr. Fixit HydroShield PUD Plus |
It is a hybrid PU elastomeric waterproofing roof coating, new technology based on water borne Polyurethane dispersions, offering excellent protection from moisture and standing water. Exhibits high resistance to all weather conditions and excellent resistance to UV radiation. |
|
| 58 |
Dr. Fixit Micro Concrete |
It is a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. It is composed of good quality cement, properly selected aggregates & additives. |
|
| 59 |
Dr. Fixit Newcoat Cool |
It is a heat reducing & ‘Energy Saving’ acrylic waterproofing coating providing a seamless waterproof barrier that can withstand expansion and contraction movements due to heat build-up on the roof surfaces. It helps in reduction of enery usages by less heat tranfer into buildings thus keeps the interiors cool. The coating serves the dual purpose of thermal reduction & with additional waterproofing protection. |
|
| 60 |
Dr. Fixit Newcoat |
It is a heavy duty terrace waterproof coating system, composed of specially developed highly elastic & resilient acrylic polymers, properly selected & graded fillers, lightfast & weather durable pigments, micro-fibres, additives & best quality fungicidal in water medium. It is used as a liquid applied waterproofing membrane for all types of building terraces. |
|
| 61 |
Dr. Fixit Pidicrete MPB |
It is composed of acrylic co-polymer emulsions & additives. It is used as bonding agent for new to old substrates & cement mortar modifier because it provides strong bonds to old & new concrete. Improves tensile & flexural strength of concrete and increases the durability of the structure. When mixed with cement, It forms a matrix & provide excellent waterproof coating. |
|
| 62 |
Dr. Fixit Polymer Mortar HB |
It is a ready-to-us repair mortar, composed of Cement, properly selected & graded fillers, polymers, additives with specially designed acrylic fibers. It is available in powder to be mixed in a definite quantity of water for application. It is used for repairs of structural members of residential, commercial & industrial buildings. |
|
| 63 |
Dr. Fixit Powercrete |
An acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonry surfaces. |
|
| 64 |
Dr. Fixit Prebond |
It is a preformed HDPE fully bonded membrane that bonds to the wet concrete cast on the membrane. After the membrane bonds with the concrete it forms an integral seal which prevents lateral water migration and makes it unaffected by any substrate settlement below the slabs. |
|
| 65 |
Dr. Fixit Primeseal |
It is water-based primer composed of acrylic emulsion polymer, properly selected fine fillers, white pigments & additives in water as a medium. It is used as primer over exterior & interior building walls before application of Dr. Fixit Raincoat & other water based paints. |
|
| 66 |
Dr. Fixit PU Foam Injection |
It is based on MDI (Methylene Diphenyl iso cyanate) polyurethane pre-polymer & accelerator. The system only reacts when it comes in contact with water, producing a relatively stiff & inert polyurathane foam. It is a 100% solid & solvent free polyurethane grout for quick temperrory closing & sealing of water bearing cracks, cavities and leaks under hydrostatic pressure. |
|
| 67 |
Dr. Fixit PU Plain Injection |
It is based on hydroxyl terminated hydrophobic polyol & iso cyanate terminated hardener. It is used for sealing & filling of dry, damp or water bearing cracks. It serves as horizontal water stop against capillary rising moisture in brickwork, stone work, etc. It has low viscosity, high penetration, quick setting and forms tough & flexible polyurethane rubber after complete chemical reaction. |
|
| 68 |
Dr. Fixit Pidiseal PS 41G |
It 41G is a two part elastomeric sealant which when mixed and applied cures by chemical reaction to form a tough, flexible rubber seal. It is recommended for sealing construction and expansion joints. |
|
| 69 |
Dr. Fixit Raincoat Coool |
It is a heat reducing & ‘Energy Saving’ acrylic waterproofing coating . It is composed of specially selected reflective additives, light fast & weather durable pigments & graded inert fillers. It is a solar reflective coating on exterior walls which helps in reduction of enery usages by less heat transfer into buildings & keeps the interiors cool. |
|
| 70 |
Dr. Fixit Repellin WR |
It is composed of Siloxane & Silane polymers dispersed in high boiling point solvent. It is used for waterproofing of concrete & cementitious vertical walls of building because it penetrate deeply into the substrate & provides an effective water repellent protective coating. |
|
| 71 |
Dr. Fixit Roofseal Flex |
It is a two component cementitious coating, composed of high quality cement, properly selected & graded fillers, additives and acrylic polymer. It is suitable for achieving waterproofing for roofs, because it provides strong bonding, good waterproofing and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete surfaces. |
|
| 72 |
Dr. Fixit Roofseal Top Coat |
It is a single component, insulating elastomeric waterproof coating for roofs that will offer a seal against water and heat, waterproofing and insulating in easy steps. This monolithic waterproof membrane provides superior crack bridging and long lasting tough weather protective seal for exposed (new and old) roof surfaces. |
|
| 73 |
Dr. Fixit Super Latex |
It is based on modified Styrene butadiene latex used for high performance applications in waterproofing and repairs. It is used for repairs of spalled concrete such as – floors, columns, beams, chhajjas, slabs & waterproofing of toilets & bathrooms & terraces. It bonds strongly to old & new concrete & plaster. |
|
| 74 |
Dr. Fixit Raincoat Waterproof Coating |
It is composed of high quality emulsion polymer, weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings. |
|
| 75 |
FEVISEAL WEATHERPROOF PRO |
It is a one-part, medium modulus, neutral curing silicone sealant for use in new or remedial weatherproofing applications. In addition to the unique features of silicone rubber such as superior high and low temperatures resistance, water resistance, and outstanding weatherability, Feviseal weatherproof Pro also provides excellent adhesion to glass, metal and numerous construction materials. |
|
| 76 |
Dr. Fixit Polyplus CP Admix |
It is an integral crystalline waterproofing admixture added to the concrete mix at the time of batching. It consists of Portland cement, very fine treated silica sand and various active chemicals. These active chemicals react with the moisture in fresh concrete with the by-products of cement hydration to cause a catalytic reaction, which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. |
|
| 77 |
Dr. Fixit Raincoat Classic |
It is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms high film thickness. |
|
| 78 |
Dr. Fixit Raincoat Select |
It is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protectivem coating for exterior walls of the buildings because it forms higher film thickness. |
|
| 79 |
Dr. Fixit Samshield XL 1500/2100 |
It is a SBS self adhesive waterproofing membrane based on a tropical grade of polymer modified bitumen. The bitumen compound is laminated onto an impervious, non-perforated, HDPE Valeron® film. The membrane is protected on the self adhesive side with a silicone coated release film. |
|
| 80 |
Dr. Fixit Epoxy Injection Grout |
It is a solvent free crack injection material composed of very low viscous liquid epoxy resin & ahardener system. Dr. Fixit Epoxy Injection Grout is used to seal & inject cracks in concrete floors, walls & structures because it provides deep penetration, shrink free solid mass, strong bonding inside the cracks and excellent resistance to honey combing & chemicals. |
|
| 81 |
Dr. Fixit Fastflex |
It is a high elastic, waterproofing cement based material. With special waterproofing properties, easy to use by plastering, applying by using a brush and roller or trowel. Can be painted or overlaid. Use with waterproofing for non-toxic water tanks, can be used with drinking water. (Passed the water quality test on toxic substances (heavy metals) of the Water Quality Control Department) Provincial Waterworks Authority. |
|
| 82 |
Dr. Fixit Pidifin 2K |
It is 2 parts polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry part is mixed with acrylic-modified emulsion and applied according to direction, the cured. The application can be applied on damp surface and Excellent waterproofing property - No leakage up to 10 m. hydrostatic pressure. |
|
| 83 |
Dr. Fixit Pidigrout 10M |
It is a high strength non – shrink free flow grout for foundation. It is ready to use, free flowing, high strength (compressive strength can reach to 800 ksc at 28 days) and dynamic load stable cementitious grout. |
|
| 84 |
Dr. Fixit Torchshield Primer |
It Primer is a solvent based bitumen modified primer conforming to ASTM D/41, to be used to seal and prepare the substrate prior to the installation of the Dr. Fixit Torchshield torch-on and Dr. Fixit Samshield, self adhesive membranes. |
|