| 1 |
Conbextra EP10 |
It is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions designed for whole pack mixing on site. |
|
| 2 |
Conbextra GP2 |
It is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. |
|
| 3 |
Conbextra HF |
It is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free-flowing precision grout for gap thickness up to 125mm. In addition the low water requirement ensures high early strength and long term durability. |
|
| 4 |
Lokfi x S(FS) |
It is a fast setting, premeasured, two part filled polyester resin grouts for application at temperatures between 8 deg C to 27 deg C. It is used where the difference between the hole diameter and bar diameter is < 25mm. Lokfi x S(FS) is used for vertical or horizontal holes where hole and bar relationship conforms to Lokfi x Polyester resin Grout S. |
|
| 5 |
Conbextra EP10 |
It is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions designed for whole pack mixing on site. |
|
| 6 |
Conbextra GP2 |
It is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. |
|
| 7 |
Conbextra HF |
It is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free-flowing precision grout for gap thickness up to 125mm. In addition the low water requirement ensures high early strength and long term durability. |
|
| 8 |
Lokfi x S(FS) |
It is a fast setting, premeasured, two part filled polyester resin grouts for application at temperatures between 8 deg C to 27 deg C. It is used where the difference between the hole diameter and bar diameter is < 25mm. Lokfi x S(FS) is used for vertical or horizontal holes where hole and bar relationship conforms to Lokfi x Polyester resin Grout S. |
|