| 1 |
Nitoseal MB175 |
It is a flexible rubber-bitumen joint sealant with excellent slump resistance. Nitoseal® MB175 stiffens to form a firm seal after application. Atack free surface will form within 1 or 2 days depending upon the conditions of exposure and ventilation, however the nature of bitumen means a slight ‘sticky’ feel will persist. |
|
| 2 |
Colpor 200PF |
It is a cold applied, pitch-free, two part polyurethane sealant, designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200PF throughout extremes of temperature conditions. Colpor 200PF is resistant to fuel, oil and hydraulic fluid spillage, will not harden in cold weather nor become excessively soft or pick up in hot conditions. |
|
| 3 |
Decofill |
It is a white acrylic based gap filler in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper finishes. |
|
| 4 |
Nitobond AR |
It is a modifi ed acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications. |
|
| 5 |
Nitocote Wallguard |
It is water based polymer coating composed of high quality acrylic polymer, with weather resistant pigments, properly selected & graded fine fillers. It is used as a waterproofing & decorative coating for protection of exterior walls of the buildings from heavy wind driven rain. |
|
| 6 |
Thioflex 600 |
It is a two part joint sealant based on a liquid poly-sulphide polymer. It is supplied as a 2.5 L pack containing a base component and curing agent in the correct proportions which, when mixed together, cure to form a tough rubber-like material. When cured, the sealant exhibits excellent adhesion to most surfaces including concrete, aluminium and stainless steel. |
|
| 7 |
Nitoseal MB175 |
It is a flexible rubber-bitumen joint sealant with excellent slump resistance. Nitoseal® MB175 stiffens to form a firm seal after application. Atack free surface will form within 1 or 2 days depending upon the conditions of exposure and ventilation, however the nature of bitumen means a slight ‘sticky’ feel will persist. |
|
| 8 |
Colpor 200PF |
It is a cold applied, pitch-free, two part polyurethane sealant, designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200PF throughout extremes of temperature conditions. Colpor 200PF is resistant to fuel, oil and hydraulic fluid spillage, will not harden in cold weather nor become excessively soft or pick up in hot conditions. |
|
| 9 |
Decofill |
It is a white acrylic based gap filler in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper finishes. |
|
| 10 |
Nitobond AR |
It is a modifi ed acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications. |
|
| 11 |
Nitocote Wallguard |
It is water based polymer coating composed of high quality acrylic polymer, with weather resistant pigments, properly selected & graded fine fillers. It is used as a waterproofing & decorative coating for protection of exterior walls of the buildings from heavy wind driven rain. |
|
| 12 |
Thioflex 600 |
It is a two part joint sealant based on a liquid poly-sulphide polymer. It is supplied as a 2.5 L pack containing a base component and curing agent in the correct proportions which, when mixed together, cure to form a tough rubber-like material. When cured, the sealant exhibits excellent adhesion to most surfaces including concrete, aluminium and stainless steel. |
|