| 1 |
Fosroc® Renderoc GP |
Not in English |
|
| 2 |
Auramix 400 |
It is a unique combination of the latest generation superplasticisers, based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowing concrete. |
|
| 3 |
Conplast WL |
It is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two fold improvement of concrete or mortar. |
|
| 4 |
Hydroproof Xtra |
It is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an eff ective waterproof membrane. |
|
| 5 |
Nitocote® EP405 |
It is a two pack, solvent free, epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use. The material cures to provide a smooth, hygienic and tough finish which is suitable for contact with potable water and foodstuffs. |
|
| 6 |
Nitocote® SN522 |
It is supplied as a colourless, ready to use, silane siloxane based solution which can be sprayed or brush applied onto the surface. |
|
| 7 |
Nitoproof 600 |
It is a single component pitch modified liquid polyurethane. It cures by reaction with atmospheric moisture to form a tough elastomeric waterproof membrane. Nitoproof 600 is designed for use on horizontal and vertical surfaces. |
|
| 8 |
Nitoproof 600 Standard |
It is a single component pitch modifi ed polyurethane cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements. |
|
| 9 |
Reebol Emulsion Xtra |
It is supplied as a pale amber liquid which turns emulsifier when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete. |
|
| 10 |
Renderoc® FC |
It is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. Renderoc FC exhibits excellent thermal compatibility with concrete, and is fully compatible with other Renderoc mortars and Dekguard protective coatings. |
|
| 11 |
Renderoc® Plug |
It is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many diffi cult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking. |
|
| 12 |
Renderoc® S2 |
It is supplied as a grey powder along with a liquid polymer and has to be mixed with water on site to produce a highly consistent, high strength repair mortar. The material is based on carefully blended cement, graded fillers and chemical additives and is polymer modifi ed to provide a mortar with good handling characteristics, while minimising water demand. |
|
| 13 |
Fosroc® Renderoc GP |
Not in English |
|
| 14 |
Auramix 400 |
It is a unique combination of the latest generation superplasticisers, based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowing concrete. |
|
| 15 |
Conplast WL |
It is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two fold improvement of concrete or mortar. |
|
| 16 |
Hydroproof Xtra |
It is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an eff ective waterproof membrane. |
|
| 17 |
Nitocote® EP405 |
It is a two pack, solvent free, epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use. The material cures to provide a smooth, hygienic and tough finish which is suitable for contact with potable water and foodstuffs. |
|
| 18 |
Nitocote® SN522 |
It is supplied as a colourless, ready to use, silane siloxane based solution which can be sprayed or brush applied onto the surface. |
|
| 19 |
Nitoproof 600 |
It is a single component pitch modified liquid polyurethane. It cures by reaction with atmospheric moisture to form a tough elastomeric waterproof membrane. Nitoproof 600 is designed for use on horizontal and vertical surfaces. |
|
| 20 |
Nitoproof 600 Standard |
It is a single component pitch modifi ed polyurethane cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements. |
|
| 21 |
Reebol Emulsion Xtra |
It is supplied as a pale amber liquid which turns emulsifier when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete. |
|
| 22 |
Renderoc® FC |
It is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. Renderoc FC exhibits excellent thermal compatibility with concrete, and is fully compatible with other Renderoc mortars and Dekguard protective coatings. |
|
| 23 |
Renderoc® Plug |
It is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many diffi cult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking. |
|
| 24 |
Renderoc® S2 |
It is supplied as a grey powder along with a liquid polymer and has to be mixed with water on site to produce a highly consistent, high strength repair mortar. The material is based on carefully blended cement, graded fillers and chemical additives and is polymer modifi ed to provide a mortar with good handling characteristics, while minimising water demand. |
|